Check Valves - Spring Series

  • 100% Factory Tested.
  • Easy installation and maintenance.
  • May be used either vertically and horizontally.
  • Available in PVC-U, Crozon PVC-C.
  • Resistance to many inorganic chemicals.
  • Sizes from : D16 to D110
  • Available standards : Metric, ASTM, British standard.
  • Threaded versions : BSP & NPT.
  • O-Rings available in food grade EPDM or Viton.

Check Valves - Ball Series

  • 100% Factory Tested.
  • Easy installation and maintenance.
  • May be used either vertically and horizontally.
  • Available in PVC-U, Crozon PVC-C.
  • Resistance to many inorganic chemicals.
  • Excellent flow charecteristics.
  • Sizes from : D16 to D110
  • Available standards : Metric, ASTM, British standard.
  • Threaded versions : BSP & NPT.
  • O-Rings available EPDM or Viton.
  • Minium return pressure : 0,2 bar(3 psi).

Check Valves - Swing Series

  • Requires little space in piping systems.
  • Easy installation : Wafer body slips between standard flanges. No ganskets required.
  • Vertical and horizontal operation
  • Available in EPDM or Viton O-Rings.
  • Excellent flow charecteristics.
  • Sizes from : D63 mm to D315 mm
  • Available standards : ISO/DIN, also ANSI/ASTM from D110(4").
  • Do not install the valve at a distance lower than 5*D of pump out.
  • Install with pipe and flunge DIN PN 10.
  • Minimum return pressure : 0.2 bar(3 psi).

Wafer Check Valve (Without Flange)

( U-PVC Checkvalves / U-PVC Wafer Check Valves )

Dia Code DN(mm) D(mm) D1(mm) D2(mm) L(mm) L1(mm) H(mm) Kg/Pie Pcs / Box PN
90 221010909 80 125 55 16 58 23 0,170 25 10
110 221011109 100 184 88 19 70 35 0,274 20 10
125 221011259 100 213 106 21 95 37 0,400 15 10
140 221011409 125 213 106 21 95 37 0,400 15 10
160 221011609 150 251 130 23 100 47 0,650 15 10
200 221012009 200 280 150 27 140 41 0,825 10 10
225 221012259 200 280 150 27 140 41 1,410 10 10
250 221012509 250 330 312 192 40 180 41 3,500 2 10
280 221012809 250 330 312 192 40 180 41 3,500 2 10
315 221013159 300 380 363 227 45 215 41 5,300 2 10
400 221014009 10

PP Non Return Valve Flange End

Technical Specification:


  • Ball Type Design, Soft Seated.
  • As per manufacturer’s.
  • Flanged as per ANSI B 16.5(150#) BS 10 (Table D/E/F) & DIN STD.

PP Non Return Valve Thread End

Technical Specification:


  • Ball Type Design, Soft Seated.
  • As per manufacturer’s.
  • Screw end (BSP thread).

PP Y Type Strainer Flange End

Technical Specification:


  • Single piece body.
  • As per manufacturer’s.
  • Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD..

PP Y Type Strainer Thread End


Contact UsGet in a touch with us

©Varad Engineers| Designed & Maintained By ITology